Although, many online reviews state that owner’s keep theirs up all winter long with no issues, should you decide to take the risk. However, the kids didn’t listen to me (as usual) and yet the pool stood firm. And when a nasty storm blew through with winds as high as 50 mph, I held my breath waiting for my beloved pool to collapse; but it didn’t. In fact, it’s so sturdy that when I noticed I had erected it with one of the legs a little bit angled, I couldn’t physically move it once the pool was filled.
Wondering how much work and elbow grease that new pool is going to require? Here’s what you need to know about keeping your above-ground pool in tip-top shape. The Intex Ultra XTR Above-Ground Pool is an absolute beast and is as close as you can get to having a legit in-ground pool with the convenience and inexpensive install of an above-ground pool. Assembly of the Intex Metal Frame Pools is a breeze, with horizontal beams and the pool legs snapped together without tools (although you will probably need a couple extra hands to put the frame together). Kiddie pools are also highly portable, which means you can take them on the road with you during summer road trips or when going down the road to a friend’s house. By the end, you will have a crystal-clear idea of which Intex above-ground pool is right for you and your family.
His work has appeared on USA Swimming, SwimSwam, STACK, NBC Universal, and more. The Intex Prism has one 52” deep pool in its line-up and the deepest of the Metal Frame pools is just 48”. In other words, no matter how many cannonballs and kids you have, there is an Intex Prism pool for you.
It managed to combat the constant influx of dirt and grime from little feet jumping in and out of the pool. Our younger ones refused to wear flip flops when walking to or from the pool, so they gave this filtration system a run for its money between the bits of grass, leaves, and dirt stuck to their feet. Even with that influx of grime, the water turned from cloudy to clear every time we ran the pump. Overall, this above ground pool is pretty easy to maintain thanks to the 110- to 120-volt Krystal Clear Cartridge Filter pump system, which, according to the Intex website, has a flow rate of 530 gallons per hour. The filtration system was simple to use (switch it on or off as you see fit, and it does the rest), and it proved to be effective at keeping the water clean. Pool chemicals are essential in protecting you and your family from germs in the water.
They’re also relatively cheaper than all the other pool types. If you’re just starting out and looking into dipping your toes into a beginner intex purespa pool, then this might suit you best. This will fully open the hole under water, so be prepared for a large amount of water to be coming out.
This round framed pool is 24 feet in diameter and 4 feet deep. It’s constructed out of a powder-coated steel frame and laminated PVC siding with 3 separate material layers for strength and durability. This pool comes complete with filter pump, pool ladder, ground cloth, and pool cover. Get everything you need for your very own backyard pool with the Intex 24-Foot x 52-Inch Ultra Frame Pool Set. There’s not always the room in the backyard for an above ground pool which is why you should consider an Intex soft-sided pool for refreshing summer fun at home that isn’t permanent but just as enjoyable.
During winter, the brand recommends draining, disassembling, and storing the pieces in a safe location. To drain, remove the cap from the valve on the exterior pool wall and hook up a hose. The filtration system was simple to use, and it proved to be effective at keeping the water clean. As expected given the minimal amount of parts in the box, setup was essentially snap-and-go. All it took was two people, some patience, and some elbow grease—we didn’t even need the DVD to get the frame built.
The Ultra XTR is perfect for the family that want a little more space in the pool, want an “all in one” kit for getting the pool up and running, and don’t want to mess around with a lengthy and confusing installation process. The frame is tough; intex baby float made with durable steel and galvanized to reduce corrosion from water, chlorine and UV exposure. The frame is also hilariously easy to put together using a snap-in system that requires zero tools (but a little bit of elbow grease).